Electrical · Ashland, KY

Electrical Repair Costs

Panel upgrades, GFCIs, wiring, and outlets. Estimates below are localized to labor and material rates in the Ashland, KY area (zip prefix 411). Enter your exact zip to refine.

Showing local estimates for Ashland, KY (41101)

Major$2,664 – $13,321

Knob-and-tube wiring present

Rewire affected circuits

Major$1,332 – $8,881

Aluminum wiring (branch circuits)

Pigtail connections or rewire

Major$1,354 – $3,610

Electrical panel outdated (fuse box)

Upgrade to modern breaker panel

Major$1,354 – $3,610

Electrical panel - Federal Pacific/Zinsco

Replace hazardous panel brand

Major$449 – $1,795

Service entrance cable damaged

Replace service entrance cable

Moderate$133 – $444

Extension cords used as permanent wiring

Install additional outlets/circuits

Moderate$132 – $442

Subpanel bonding/grounding issue

Correct grounding/bonding

Moderate$88 – $353

Electrical panel - double-tapped breakers

Add breakers or tandem breakers

Minor$45 – $272

Light fixtures not working

Repair/replace light fixtures

Moderate$89 – $222

No AFCI protection (bedrooms)

Install AFCI breakers (per circuit)

Moderate$66 – $221

Ungrounded 3-prong outlets

Install ground or GFCI protection

Major$66 – $177

No GFCI protection (kitchen/bath/exterior)

Install GFCI outlets (per location)

Moderate$44 – $177

Open junction boxes/exposed wiring

Cover junction boxes, secure wiring

Minor$67 – $178

Ceiling fan loose/wobbling

Secure ceiling fan to rated box

Moderate$44 – $132

Reversed polarity outlets

Correct wiring on outlets

Minor$13 – $45

Exterior outlets not weatherproof

Install weatherproof covers (in-use)

Major$23 – $46

Smoke detectors missing/expired

Install/replace smoke detectors

Minor$9 – $44

Electrical panel - missing knockouts

Install knockout fillers

Major$23 – $46

Carbon monoxide detectors missing

Install CO detectors

Minor$5 – $23

Missing outlet/switch cover plates

Install cover plates

About These Estimates

These estimates are based on national averages adjusted for local labor and material costs using BLS and BEA data. Actual costs vary based on specific conditions, contractor availability, and project complexity. Always obtain multiple quotes from licensed local contractors.